Changing Default Copy Settings - Brother MFC-580 Owner's Manual

Changing Default Copy Settings

Press Menu/Set, 3 to change default settings for Copy mode. These settings will remain until you
change them again by pressing Menu/Set.
By pressing a number, you can adjust the Quality, Colour and Contrast copy settings as shown in the
following chart. Press
to save your selection. Press Stop/Exit—OR—Press
change.
Press Menu/Set and 3.
1.QUALITY
2.COLOUR ADJUST
3.CONTRAST
Select Copy Quality
1
Press Menu/Set, 3, 1.
2
to select copy quality (NORMAL, FAST or BEST) and press Menu/Set
Press or
when the screen displays your selection.
3
Press Stop/Exit.
Colour Adjustment
1
Press Menu/Set, 3, 2.
2
Press or to select RED, GREEN, or BLUE, and press
Menu/Set.
3
Press or to adjust the degree of colour, and press Menu/Set.
4
Return to Step 2 to select the next colour—OR—Press Stop/Exit.
Copy Contrast
You can choose the contrast setting for a copy. Greater contrast can help an image look sharper and
more vivid. This feature is available only for colour copying.
1
Press Menu/Set, 3, 3.
2
Press to decrease contrast—OR—Press
Press Menu/Set when the screen displays your setting.
3
Press Stop/Exit.
to move through the selections for each setting. Press Menu/Set
or
QUALITY:NORMAL
QUALITY:FAST
QUALITY:BEST
1.RED
2.GREEN
3.BLUE
–
to select the next setting you want to
R: – +
G: – +
B: – +
+
to increase contrast.
: is default
Light Dark
R:– +
G:– +
B:– +
51
Making Copies