Brother BE-0901E-AC-PC Instruction Manual page 104

Chapter 5 Editing Embroidery Data
! The number for repetition is 1 to 100 for both vertical (Row) and horizontal (Column) directions.
! The unit for repetition can be set in inches.
[Configuration] of Tool menu of the machine controller. (→ page 6-24)
! The pattern connection can be set in "Direction" as follows:
From top left, alternating directions
From bottom left, alternating directions
1. Select [Repeat] from Edit menu or click
2. Specify the number, interval and direction of repetition.
Repeat count in the
longitudinal direction
Repeat count in the
lateral direction
All patterns created in repetition are grouped as a single pattern.
Longitudinal distance (Unit: 0.1 mm or 0.01")
Lateral distance (Unit: 0.1 mm or 0.01")
The number is set automatically so as the number of
repetitions to be the maximum within the sewing area.
3. Click [OK].
5-18
To use the inch unit, set the length to [inch] on the
From top left, left to right direction
W0716Q
From bottom left, left to right direction
W0718Q
.
The value can be directly entered.
Click here to increase/decrease the value.
BE-0901E-AC-PC• BE-1201B-AC-PC
W0717Q
W0719Q
Select the direction of repetition.
Sets margins of the sewing area used for
the calculation of the repetition number in
the automatic setting.
Select the reference position for spacing.
W1033Q