Configuration Of Software - Brother BE-0901E-AC-PC Instruction Manual

2-2 Configuration of Software

This software is mainly composed of the following four programs. The software is provided on CD-R.
(1) Embroidery Machine Controller
(2) Embroidery Data Explorer
(3) Embroidery Data Editor
(4) Production Report
Program Functions
(1) Machine Controller
This program controls embroidering operation of the machine.
A embroidering status can be displayed on the screen in real time, and data for operating the
machine can be set.
(2) Embroidery Data Explorer
This program handles files of embroidery data on patterns.
Transmission of embroidery data to the machine, as well as copy, move and retrieval of a file are
available by means of this program. Embroidery data can be converted from the paper tape or
floppy disk.
(3) Embroidery Data Editor
This program allows editing of data on embroidering operation including scaling, rotation, color
change, etc.
(4) Production Report
This program is for collecting data on actual embroidering operation and calculating output, etc.
BE-0901E-AC-PC• BE-1201B-AC-PC
Chapter 1 An Introduction of Embroidery Machine
1-5