Measures Against Thread Breakage; Remedies - Brother BE-0901E-AC-PC Instruction Manual

Chapter 7 Operation of Machine

7. Measures against Thread Breakage

7-1 Remedies

1. If embroidering is suspended due to thread breakage, "E-0A" is displayed while blinking on the
operation panel.
2. Correct the broken thread and pass it through again.
Refer to "Chapter 2, 3-1 Upper Threading" (→ Page 2-12) for details.
3. Press the switch in order to reset the alarm of thread breakage.
4. Return the hoop to a position where thread breakage occurred by pressing the STEP BACK
switch.
When the switch is pressed, the machine continues operation without holding the switch. To stop the
machine, press the switch to the opposite side or press the
5. Press the switch to resume operation.
7-8
BE-0901E-AC-PC• BE-1201B-AC-PC
W1610
W1271Q
switch.