Brother BE-0901E-AC-PC Instruction Manual page 28

Chapter 1 An Introduction of Embroidery Machine
Selection of Menu
Processing of software is carried out by giving a command. A command can be given by the mouse as
described below:
1. Move the arrow pointer to a menu name and click there.
2. A list of commands is displayed. Click the required command.
The check mark (√) indicates
that the command is selected.
When the arrow pointer is moved to another menu while a list of commands is displayed, those of the
latter menu are displayed.
1-10
W1364Q
Dimmed commands cannot be used unless
an appropriate item is selected.
Depending on the model, some items
cannot be used.
Commands with a
mark have sub menus.
BE-0901E-AC-PC• BE-1201B-AC-PC
W1731