Mounting Of The Reader - Pepperl+Fuchs PXV F200-B17-V1D Series Manual

PXV...-F200-B17-V1D
Installation
3.2

Mounting of the Reader

Mounting the Reader
Make sure that you are able to mount the reader in a stable position. Before mounting the
reader, make sure that the travel of the moving system part is arranged so that this part does
not move outside of the reader's depth of focus range during operation.
1.
Mount the reader on the moving part of the system and secure the reader in place using four
screws through the mounting adapter on the reader.
2.
Mount the reader vertically so that the lens of the reader with the ring light and camera module
is aligned toward the code tape.
30°
Figure 3.1
3.
Alternatively, mount the reader horizontally so that the lens of the reader with the ring light and
camera module is aligned toward the code tape.
Figure 3.2
1 Read Distance
4.
Check that the distance between the reader and the code tape is equal to the read distance of
the reader:
12
30°
Code tape
Read distance
Vertical alignment tolerance
1
Horizontal alignment tolerance
30°
30°