Table of Contents
Advertisement
Mounting
8.2.2
Version: 2.1
► Carefully degrease the following components with a cloth:
• Contact surfaces with adjacent components
• Centering and motor shaft
• Internal diameter of the clamping hub
• Spacer sleeve inside and outside
In case of motor with feather key [+]
► Remove feather key [+] and insert half wedge
► Remove the screw plug [1] from the adapter plate [2]
► Turn the clamping hub [1] until the screw [2] can be seen above
the mounting hole
► Loosen the screw [2] by one turn
AG2400
Mechanical installation
───
77
Advertisement
Table of Contents
