6 L
/L
T
O
OSS
ENGTH
EST
PERATION
D
EFINING A TEST CONFIGURATION
NOTE:
52
Defining a test configuration
In Loss/Length mode a test configuration allows you to define
various settings like the test reference method or the cable and
connector settings. When performing a test a predefined test
configuration can be recalled and set to active to assign it.
As factory setting one test configuration named default is
available, which can be edited but not deleted. New test
configurations can be created by copying and changing an
existing project or by creating a new one.
Test configurations can only be created, deleted, or edited if the
instrument is configured as Local (see
type:" on page
50).
Creating a new test configuration
The instrument is in Loss/Length mode and configured as
I
Local.
[A]
Press the
key and tap [Test Configuration].
J
The test configuration list opens. As factory setting only the test
configuration default is available.
Fig. 15
Test configuration list.
To add a new test configuration:
[A]
1.
Press the
key.
"To change the instrument
OLTS-85/OLTS-85P