Table of Contents
Advertisement
NOTE:
OLTS-85/OLTS-85P
To select an adapter/tip:
[A]
1.
Press the
key.
2.
Tap the
[Tip]/[Adapter]
3.
Select the suitable adapter/tip.
Operation
Adjusting the focus
Use the focus control to adjust the sharpness.
J
The focus quality bar helps you to find the best setting (see
"Focus quality bar" on page
Adjusting the magnification
Press the Magnification Control key to modify the live display
J
from high to low magnification and vice-versa.
In the high magnification mode, automatic centering is
available.
Running a test
[A]
Press the
key and tap the
J
– or –
Press the QuickCapture™ key if the button action is set to Test.
– or –
Press the central key.
When the test procedure terminates, the information shown on
the display depends on the current overlay setting.
Overlay
[A]
Press the
key and then the
J
the overlay view. Repeat the action until the desired view
appears:
without overlay > with colored edges > with colored edges
and legend > without overlay > ...
A summary of test results is displayed at the upper right of the
screen (following figure is just an example and may vary).
11 P
ROBE
button.
93).
[Test]
button.
[Overlay]
button to change
/PCM O
PERATION
O
PERATION
95
Advertisement
Table of Contents
