Adjusting General Test Settings; "Adjusting General Test Settings - Viavi SmartClass OLTS-85 Operating Manual

Step
1
2
3
4
5
OLTS-85/OLTS-85P
How to perform a Loss/Length test
A Loss/Length test consists of several steps to achieve reliable
results. These steps are:
Action
"Adjusting general test settings"
E.g. select the instrument or cable type.
"Defining a test configuration"
Define settings like the test type, the referencing method
or the limit specifications.
"Referencing"
"Running and viewing a Loss/Length test"
"Saving Loss/Length test results"
These steps are described in detail in the following sections.

Adjusting general test settings

For a loopback test the instrument must be set to the type Local.
For a remote test, on the other hand, two instruments are
required. One needs to be set to the type Local, the other to
Remote.
Test setups can only be set on the local instrument. After
connecting, the settings are transmitted to the remote
instrument.
To distinguish the instruments stick adhesive labels:
Furthermore, there are adhesive labels with Local and Remote
imprint, which serve to distinguish each instrument.
Attach these adhesive labels on the designated recess of the
J
dust cap of your instruments.
6 L /L T O
OSS ENGTH EST PERATION
A
DJUSTING GENERAL TEST SETTINGS
See page
49
52
55
58
62
49