Setting Your Changes As The New Default; Restoring All Settings To The Factory Settings - Brother MFC-J285DW Advanced User's Manual

Chapter 7
NOTE
If you get a paper jam, press Advanced
after step i, and then press one of the
jam prevention settings: 2-sided1 or
2-sided2.
2-sided1 uses a longer print time for the
ink to dry.
2-sided2 uses a longer print time and
will also print in lighter colors.
Setting your changes as the
new default
You can save the settings for the copy
options you use most often—such as
Quality, Enlarge/Reduce, Density,
Page Layout, Remove Background and
2-sided Copy—by setting them as the
defaults.
These settings will remain until you change
them again.
a
Press (Copy).
b
Press Options.
c
Press s or t on the Touchpanel to
display the available settings, and then
press the setting you want to change.
Press s or t to display the available
options, and press the option you want
to set. Repeat this step for each setting
you want to change.
d
After changing the last setting, press
s or t to display Set New Default.
e
Press Set New Default.
f
Press OK.
The Touchscreen asks you again to
confirm that you want to set the changes
as the new default settings.
Press Yes.
g
Press .
36
Restoring all settings to the
factory settings
You can restore the copy settings that you
have changed—such as Quality,
Enlarge/Reduce, Density,
Page Layout, Remove Background and
2-sided Copy—to the default factory
settings.
a
Press
b
7
Press Options.
c
Press s or t on the Touchpanel to
display Factory Reset.
d
Press Factory Reset.
e
Press Yes.
f
Press .
(Copy).
7