Pri; Msdn/Dpnss - Mitel 3300 General Information Manual

3300 ICP General Information Guide

PRI

The following table lists features supported by PRI.
Feature
ANI/DNIS/ISDN Number
Delivery
Call-by-call Service
Calling Line Identification
E-911 Support

MSDN/DPNSS

The following table lists features supported by MSDN/DPNSS.
Feature
Callback
Call Forward
Calling Line Identification
Camp-on (Call Waiting)
Call Split
Conference
Conference Split
Do Not Disturb
166
Description
Automatic Number Identification and Dialed Number Identification Service
identify numbers that are transmitted on an incoming trunk.
With Call-by-Call Service, access channels do not have to be dedicated to
specific services such as OUTWATS or 800 services.
This enables the customer to reduce facilities and integrate dedicated and
switched, inbound and outbound, voice and data traffic on a single facility. It also
allows a business with calling peaks to dynamically allocate coverage across
channels so that access lines are optimized.
This implementation ensures that incoming calls are not turned away because
all incoming channels are busy while adjacent outgoing channels are idle.
The telephone number of the calling party is transmitted to the Mitel PBX and
can be sent to devices within the system.
Displays indicate the extension and the location of the person who dialled 911.
Notifications of 911 calls are audible, continuous and distinct from regular
ringing patterns when the set is idle and on hook. If the user is already on a call,
a new call tone alerts the user to the alarm condition. The alarm overrides sets
having DND enabled.
Description
Allows you to request that the system notify you when a busy line becomes idle
or when an unanswered station goes off-hook and on-hook.
Allows you to redirect incoming calls to an alternate number.
The telephone number of the calling party is transmitted to the Mitel PBX and can
be sent to devices within the system.
Allows you to notify a busy party that you are waiting. An attendant may also put
a call through to a busy station to indicate that a call is waiting. Upon hearing the
Call Waiting tone, the busy party can either respond or finish the current call.
See Conference Split.
Allows you to connect three or more calls into a single telephone conversation.
While you are in a Conference, you can use any of the features that would
normally be available during a two-party call.
Allows you to separate a 3-party conference so that two of the parties can speak
privately, while the other is placed on Consultation Hold.
Allows you to place your set in an apparent busy condition without affecting the
outgoing functionality. If someone calls your set while DND is activated, they
hear a special busy tone.
Page 1 of 2