Advanced Receiving Operations; Operation From Extension Telephone; Changing The Fax Receive Code; Printing A Fax In Memory - Brother MFC-3100C Owner's Manual

Advanced Receiving Operations

Operation from Extension Telephone

If you answer a fax call on an extension phone or on an external phone in the
EXT. jack, you can make your MFC take over by using the Fax Receive Code.
When you press the Fax Receive Code
(See
Easy Receive
If you answer a call at an extension or external phone, and no one is on the line,
assume you're receiving a fax. At an extension phone, press
receiving tones (chirps), then hang up. At an external phone, press
wait for the phone to be disconnected (the LCD shows RECEIVING) before
you hang up. (Your caller will have to press Black Fax Start to send the fax.)

Changing the Fax Receive Code

The preset Fax Receive Code (
systems.
If you are always disconnected when accessing your external TAD remotely,
Note
try changing the Fax Receive Code from
1
Press Menu/Set, 2, 1, 3.
2
Press to select
or
and then press Menu/Set.
3
If you want to, enter a new Fax Receive
Code, and then press Menu/Set.
4
Press Stop/Exit.

Printing a Fax in Memory

If you set Fax Storage to
the memory when you are at your MFC. (See
1
Press Menu/Set, 2, 5, 4.
2
Press Black Fax Start.
3
After printing is finished, press Stop/Exit.
, page 6-3.)
5 1) might not work with some telephone
ON (or OFF),
ON for remote retrieval, you can still print a fax from
5 1, the MFC starts to receive a fax.
5 1 to # # #.
Setting Fax Storage
S E T U P R E C E I V E
5 1, wait for fax
5 1 and
, page 9-2.)
6 - 4