To Select Or Change Your Receive Mode; Setting Ring Delay - Brother MFC-3100C Owner's Manual

To Select or Change Your Receive Mode

1
Press Receive Mode. The LCD shows your current selection.
2
Continue to press Receive Mode until your new selection appears. After two
seconds the LCD returns to the date and time display, along with your new
Receive Mode setting.
If you are changing the Receive Mode while in another operation, the LCD
returns to that operation.

Setting Ring Delay

The Ring Delay setting determines the number of times the MFC rings before it
answers. If you have extension phones on the same line as the MFC, or
subscribe to the telephone company's Distinctive Ring service, keep the Ring
Delay default setting of 4. You can try setting the Ring Delay to
however, if you do not receive all your faxes, you must reset it to
, page 6-3 and
Easy Receive
1
Press Menu/Set, 2, 1, 1.
2
Press to select how many times the line rings before the MFC answers
or
(00–05), and then press Menu/Set. If you select 00, the line doesn't ring at all.
3
Press Stop/Exit.
Current Receive Mode
Operation from Extension Telephone
FAX ONLY FAX ONLY
EXTERNAL TEL / TAD EXTERNAL TEL / TAD
MANUAL MANUAL
5
4
, page 6-4.)
S E T U P R E C E I V E
rings;
rings. (See
6 - 2