Advanced Receiving Operations; Operation From Extension Telephones; For Fax/Tel Mode Only - Brother MFC-8440 User Manual

Advanced receiving operations

Operation from extension telephones

If you answer a fax call on an extension telephone, or an external
telephone into the correct socket on the machine, you can make your
MFC take the call by using the Remote Activation Code. When you
press the Remote Activation Code
a fax.
(See Fax Detect on page 5-4.)
If the MFC answers a voice call and pseudo/double-rings for you to
take over, use the Deactivation Code
extension phone. (See Setting the F/T Ring Time (Fax/Tel mode
only) on page 5-3.)
If you answer a call and no one is on the line, you should assume that
you're receiving a manual fax.
■
At an extension phone (on a separate telephone wall
socket/phone socket), press
(chirps), and then hang up.
■
At an external phone (connected to the MFC's EXT socket),
51
press and wait for the phone to be disconnected before you
hang up (the LCD shows Receiving ).
Your caller will have to press

For FAX/TEL mode only

When the MFC is in FAX/TEL mode, it will use the F/T Ring Time
(pseudo/double-ringing) to alert you to pick up a voice call.
Lift the external telephone's handset, and then press
answer.
If you're at an extension phone, you'll need to lift the handset during
the F/T Ring Time and then press
no one is on the line, or if someone wants to send you a fax, send the
call back to the MFC by pressing
51
, the MFC starts to receive
#51
to take the call at an
51
, wait for fax-receiving tones
Start
to send the fax.
#51
between the double rings. If
51
.
Tel/R
to
SETUP RECEIVE 5 - 8