Remote Fax Options (Not Available For Color Fax); Fax Forwarding/Paging; Programming A Fax Forwarding Number; Programming Paging Number - Brother MFC-3100C Owner's Manual

Remote Fax Options
9
9
(Not Available for Color Fax)

Fax Forwarding/Paging

You cannot use Paging and Fax Forwarding at the same time.
You cannot use Paging and Fax Forwarding when Fax Storage is set to OFF.

Programming a Fax Forwarding Number

When Fax Forwarding is set to ON, your MFC stores the received fax in
memory. Then it dials the fax number you've programmed and forwards the fax
message.
1
Press Menu/Set, 2, 5, 1.
2
Press until the LCD shows
or
FAX FORWARD?, and then press
Menu/Set.
3
The LCD prompts you to enter the fax
number where faxes will be forwarded.
Enter the forwarding number (up to 20
digits), and then press Menu/Set.
4
Press Stop/Exit.

Programming Paging Number

When Paging is selected, your MFC dials the pager number you've programmed,
and then dials your Personal Identification Number (PIN); this activates your
pager so you will know that you have a fax message in the memory.
1
Press Menu/Set, 2, 5, 1.
2
Press until the LCD shows
or
PAGING?, and then press Menu/Set.
3
Enter your pager phone number (up to 20
digits) followed by # #, and then press
Menu/Set. Do not include the area code
if it is the same as that of your MFC.
For example, 1 8 0 0 5 5 5 1 2 3 4 # #.
R E M O T E F A X O P T I O N S ( N O T A V A I L A B L E F O R C O L O R F A X )
9 - 1