Pause; Fax Redial; Tone/Pulse (For Canada Only) - Brother MFC-3100C Owner's Manual

Pause

Press Redial/Pause to insert a 3.5 second pause between numbers. If you are
dialing overseas, you can press Redial/Pause as many times as needed to
increase the length of the pause.

Fax Redial

If you're sending a fax manually and the line is busy, press Redial/Pause to
try again. Anytime you want to make a second call to the last number dialed,
press Redial/Pause to save time.
If you're sending a fax automatically and the line is busy, the MFC will redial
automatically up to three times at 5 minute intervals.

Tone/Pulse (For Canada Only)

If you have pulse dialing service, but need to send tone signals (for example, for
telephone banking), follow the directions below. If you have touch tone service,
you do not need this feature to send tone signals.
1
Lift the handset.
2
Press #. Any digits dialed after this send tone signals.
3
When you hang up, the MFC returns to pulse dialing service.
8 - 6
A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S