Using The Options Key; Paper Type - Brother MFC-3100C Owner's Manual

Using the Options Key

Use the Options key to set number of copies, paper type, paper size,
brightness, enlargement/reduction ratio and special copy options for the next
copy only.
Press
Options
OPT:#OF
COPIES01
OPT:PAPER TYPE
OPT:PAPER SIZE
OPT:BRIGHTNESS
OPT:ELG/RDC
OPT:SPECIAL

Paper Type

You can change the paper type setting for the next copy only.
1
Place the original face down in the ADF.
2
Use the dial pad to enter the number of copies you want (up to 99).
3
Press Options and press
Menu/Set.
4
or
Press to select the type of paper you are using (PLAIN, INKJET,
GLOSSY or TRANSPARENCY), and then press Menu/Set.
5
If you selected GLOSSY, press
then press Menu/Set.
The print quality of black ink varies depending on the kind of glossy paper you
Note
are using. Black ink is used when you select 4-COLOR. If the glossy paper you
are using repels the black ink, select 3-COLOR, which simulates black ink by
combining the three ink colors.
6
Press Black Copy or Color Copy—OR—Press
Menu Selections
or
to select
or
Options
NO. OF COPIES:XX
PLAIN/INK JET/GLOSSY
(4-COLOR or 3-COLOR)/
TRANSPARENCY
LETTER/LEGAL/A4/
: 4" × 6"
POST CARD
- +
50%/78% LGL>LTR/
94% A4>LTR/100%/
104% EXE>LTR/150%/
200%/ZOOM
2 IN 1*/OFF
*(Black and White only)
OPT:PAPER TYPE, and then press
to select 4-COLOR
or
M A K I N G C O P I E S
Factory
Setting
01
PLAIN
LETTER
- +
100%
OFF
or 3-COLOR, and
for additional settings.
11 - 4