Step B: Alignment Check - Brother MFC-3100C Owner's Manual

Check the quality of the four color blocks in the sheet. (BLACK/CYAN/
YELLOW/MAGENTA).
If the quality is OK for all colors, press 1 (
If white horizontal lines appear in some color blocks below, press 2 (
The LCD will ask you if the print quality
is OK for each color.
Press 2 (
The LCD shows:
Press 1 (
After cleaning is finished, press Black Fax Start . The MFC will start printing
the Print Quality Check Sheet again and then return to STEP A . If STEP A is
OK, press 1 to proceed to STEP B .

STEP B: Alignment Check

The LCD shows:
Check the 600 DPI and 1200 DPI test prints to see if number 5 most closely
matches number 0. If the number 5 sample of both the 600 DPI and 1200 DPI
are the best matches, press 1 (
If another test print number is a better match for either 600 DPI or 1200 DPI,
press 2 (
20 - 11
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
OK
NO ) for any color with a problem.
YES ). the MFC will start cleaning the colors.
NO ) to select it.
Do NOT select
YES ) to go to STEP B –– OR ––
Poor
BLACK OK?
1.YES 2.NO
START CLEANING?
1.YES 2.NO
IS STEP "B" OK?
1.YES 2.NO
YES ) to finish STEP B –– OR ––
NO ).
}
600 DPI
}
1200 DPI