Password Menu; Test Menu - Rice Lake 482-AG Technical Manual

482-AG Livestock Digital Weight Indicator
3.4

Password Menu

The Password menu is used to set or edit passwords.
CONFIG
Parameter Settings
CNFG 000000 The configuration password, if enabled, is used for electronic sealing of the indicator. Once a configuration password has
–
been set, the existing configuration password is required before the password can be edited. Entering this menu requires
0 999998
the configuration switch to be pressed. 000000 = no password
000000
USER The user password, if enabled, restricts access to the serial and print formatting menus. Once a user password has been
–
entered, the existing user password is required before the password can be edited. 0000000 = no password
0 999998
Enter 999999 to reset either password. This reset can also be used in the event a password is forgotten.
IMPORTANT
Entering 999999 will reset the configuration of the scale to default values.
3.5

Test Menu

CONFIG
Parameter Choices
ADTEST — Displays raw A/D counts
NWGMNT TOTAL The number of weighments that exceed value set in WGMNST
OVECAP The number of weighments that exceed the capacity of the scale as set in the config and format menus, see
on page 18
WGMNST 0–999999 Weighment Threshold – sets the weight threshold over which WGMNST/Over value will be counted
DEFLT — Resets all parameters to factory defaults; at DEFLT, press GROSS/NET, indicator will display SAVING and cycle power
www.RiceLake.com
26 Visit our website
FORMAT CALIBR PROGRM
Figure 3-6. Password Menu
Table 3-8. Password Menu Parameters
FORMAT CALIBR
ADTEST
Figure 3-7. Test Menu
and Section 3.1.3 on page 22
Table 3-9. Test Menu Parameters
PASWRD TEST
CNFG USER
Description
PROGRM PASWRD
NWGMNT WGMNST
TOTAL OVERCAP
Description
MENU
TEST MENU
DEFLT
Section 3.1