Sub-Fc70(0X46): Get 8 Locked Periods; Get 8 Locked Periods - ICP DAS USA ACS-20B-MRTU User Manual

5.2.27 Sub-FC70(0x46): Get 8 Locked Periods

This command gets 8 locked periods in a day from module. One locked period composed
of Start Time and End Time. The End Time should be late after the Start Time.
Byte Description
order
00 Address
01 FC
02 Sub-FC
Byte Description
order
00 Address
01 FC
02 Sub-FC
03 P1 Start Hour
04 P1 Start Minute
05 P1 Start Second
06 P1 End Hour
07 P1 End Minute
08 P1 End Second
09~44 P2 to P7 ...
45 P8 Start Hour
46 P8 Start Minute
47 P8 Start Second
48 P8 End Hour
49 P8 End Minute
50 P8 End Second
ACS-20B(W)-MRTU User Manual
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved
Table 5-57: FC100-Sub-FC70 Request
Size Value
1 Byte 1 ~ 247 (Net ID)
1 Byte 0x64
1 Byte 0x46
Table 5-58: FC100-Sub-FC70 Response
Size Value
1 Byte 1 ~ 247 (Net ID)
1 Byte 0x64
1 Byte 0x46
1 Byte 0 ~ 23, period 1 start Hour
1 Byte 0 ~ 59, period 1 start Minute
1 Byte 0 ~ 59, period 1 start second
1 Byte 0 ~ 23, period 1 end Hour
1 Byte 0 ~ 59, period 1 end Minute
1 Byte 0 ~ 59, period 1 end second
36 Bytes period 2 ~ 7 start time and end time
1 Byte 0x00
1 Byte 0x00 ~ 0xFF, enabled state of 8 periods
1 Byte 0x00
1 Byte 0x00 ~ 0xFF, enabled state of 8 periods
1 Byte 0x00
1 Byte 0x00 ~ 0xFF, enabled state of 8 periods
Version 1.1
E-mail: service@icpdas.com
53
Page：