Set Toggle Mode; Invert Red/Blue Led - ICP DAS USA ACS-20B-MRTU User Manual

Figure 4-5: Set relay hold time.

4.5 Set Toggle Mode

In the "IR Sensing" section of the utility, click the "Set" button after checking or unchecking the
"Toggle Mode" checkbox as shown in figure 4-6. Refer to chapter 5 for related Modbus register
and command.
Figure 4-6: Set toggle mode.

4.6 Invert Red/Blue LED

In the "IR Sensing" section of the utility, click the "Set" button after checking or unchecking the
" Invert Red/Blue LED" checkbox as shown in figure 4-7. Refer to chapter 5 for related Modbus
register and command.
18
ACS-20B(W)-MRTU User Manual Version 1.1 Page：
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved E-mail: service@icpdas.com