Sub-Fc68(0X44): Get Enabled State Of Locked Periods; Get Enabled State Of Locked Periods - ICP DAS USA ACS-20B-MRTU User Manual

5.2.25 Sub-FC68(0x44): Get Enabled State of Locked Periods

This command gets the enable/disable status of the 8 locked periods in a day by one
byte with 8 bits (b7~b0=>P8~P1) where bit value = 1 means enabled and bit value = 0
disabled. E.g. 0x73 (hex) = 0111 0011 (binary) means 5 locked periods are enabled.
Byte Description
order
00 Address
01 FC
02 Sub-FC
Byte Description
order
00 Address
01 FC
02 Sub-FC
03 Reserved
04 Every day
enabled state
05 Reserved
06 Sunday
enabled state
07 Reserved
08 Monday
enabled state
09 Reserved
10 Tuesday
enabled state
11 Reserved
12 Wednesday
enabled state
13 Reserved
14 Thursday
enabled state
15 Reserved
16 Friday
enabled state
17 Reserved
18 Saturday
enabled state
ACS-20B(W)-MRTU User Manual
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved
Table 5-53: FC100-Sub-FC68 Request
Size Value
1 Byte 1 ~ 247 (Net ID)
1 Byte 0x64
1 Byte 0x44
Table 5-54: FC100-Sub-FC68 Response
Size Value
1 Byte 1 ~ 247 (Net ID)
1 Byte 0x64
1 Byte 0x44
1 Byte 0x00
1 Byte 0x00 => Every day mode (default)
0x01 => Weekday mode
1 Byte 0x00
1 Byte 0x00 ~ 0xFF, enabled state of 8 periods
1 Byte 0x00
1 Byte 0x00 ~ 0xFF, enabled state of 8 periods
1 Byte 0x00
1 Byte 0x00 ~ 0xFF, enabled state of 8 periods
1 Byte 0x00
1 Byte 0x00 ~ 0xFF, enabled state of 8 periods
1 Byte 0x00
1 Byte 0x00 ~ 0xFF, enabled state of 8 periods
1 Byte 0x00
1 Byte 0x00 ~ 0xFF, enabled state of 8 periods
1 Byte 0x00
1 Byte 0x00 ~ 0xFF, enabled state of 8 periods
Version 1.1
E-mail: service@icpdas.com
51
Page：