Access All Settings - ICP DAS USA ACS-20B-MRTU User Manual

(1) Check/Uncheck "Enabled Locked Periods Function" checkbox to enable/disable this
function.
(2) Click the "Locked Periods" combobox to select 8 periods (0 ~ 7) for setting. The "End
Time" should be more than the "Start Time".
(3) Click "Enable Every Day Mode" or "Enable Week Day Mode" radio button for "Every Day
Mode" or "Week Day Mode".
(4) This combobox can set the locked periods for every day and weekdays (Sunday to
Saturday) by checking or unchecking the P0 ~ P7 checkboxes to enable or disable them.
(5) Click the right "Set" button to finish the setting.

4.10 Access All Settings

Separate settings can be set as previous sections. Or click Menu [Settings]=>[Download All
Settings to the ACS-20-MRTU] to set all settings to the module at once after all parameters are
selected in the utility.
Click Menu [Settings]=>[Load All Settings from the ACS-20-MRTU] to read back all settings to
utility from the module at once.
ACS-20B(W)-MRTU User Manual
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved
Figure 4-11: Access all setting of the module.
Version 1.1
E-mail: service@icpdas.com
21
Page：