Set Ir Sensing Record Mode; Set Locked Periods - ICP DAS USA ACS-20B-MRTU User Manual

4.8 Set IR Sensing Record Mode

The "Record Mode" in the "IR Sensing Records in Storage" section (figure 4-9) is for setting the
storage mode when the storage is full. There are two modes:
Mode 0 (Store from start): (default) Clear all records and store from start.
Mode 1 (Discard the latest): Discard new data and keep 1600 records of old data.

4.9 Set Locked Periods

Locked periods can be set in the "Locked Periods Settings" section of the utility as shown in
figure 4-10. The module goes into locked mode (no IR sensing) in the locked period.



ACS-20B(W)-MRTU User Manual
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved
Figure 4-9: Set IR sensing record mode.

Figure 4-10: Set locked periods.
Version 1.1
E-mail: service@icpdas.com

20
Page：