3.4 Restore Default Communication Settings
Rotate the rotary switch to the scale 'E'. Power cycle the module to restore the default serial
communication (Table ).
Figure 3-4: Rotate the rotary switch to 'E' scale for default communication.
Baud Rate
Paritys
Data Bits
Stop Bits
Modbus Response Delay
Modbus Net ID
ACS-20B(W)-MRTU User Manual
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved
Table 3-2: relay hold time to the scale of the rotary s
Item
Default value
9600 bps
None
8
1
1 ms
1
Version 1.1
E-mail: service@icpdas.com
14
Page: