Table 4: Default Usernames And Passwords Of Management Interfaces; Figure 7: Diagram Of Interface Paths With A Serial Console Connection - Kontron MSP8020 Series User Manual

Figure 7: Diagram of interface paths with a serial console connection

The serial port communication parameters are 115200 baud, no parity, 8 data bits and backspace key set to "Ctrl-h".
BIOS POST and configuration menu redirection is VT100+. OS console support/configuration is customer specific.
The ASCII control code for "Ctrl-g" is 7. To type "Ctrl-gg", use the "Ctrl-g" ASCII control code
Example of a serial connection to the node CPU serial console (OS):

Table 4: Default usernames and passwords of management interfaces

Configuration interface
Node SMWI
ShMC CLI
Node CPU serial console (OS)
2 times in a row.
1. Connect a PC to the active hub's console port
2. Establish a connection using the PC terminal emulator with the parameters 115200
baud, no parity and one stop bit
3. To configure the hub console port MUX, type
<Node CPU No. (1-2)>
www.kontron.com
MSP8020 Series User Guide Rev. 1.1
Ctrl-g <Node No.
Username
admin
admin
Customer specific
(1-9)>, then Ctrl-gg
Password
admin
admin
Customer specific
// 18