Table of Contents
Advertisement
5/ Performing Updates
A ZIP file provided by Kontron contains firmware updates for node components.
5.1. Processor Node Update
To update the firmware of the node BMC, BIOS and FPGA:
SMWI
Dashboard > OneClick Upgrade
Click on advanced settings
Select the platform from the dropdown list
Select the node to update from the dropdown list
Click on bundle settings
Click on CHANGE BUNDLE FILE
Select the proper .zip file
Click on Open
Wait for the transfer to finish
Click on START UPGRADE
API calls available to update a node
Notes
This operation must be done for all nodes
5.2. OneClick Update for all Nodes
To update the firmware of the node BMC, BIOS and FPGA of all nodes sequentially:
SMWI
Dashboard > OneClick Upgrade
Click on bundle settings
Click on CHANGE BUNDLE FILE
Select the proper .zip file
Click on Open
Wait for the transfer to finish
Click on START UPGRADE
API calls available to update a node
Notes
The update will be performed only for components with
files included in the HPM file bundle.
Computer command prompt
To update all updatable firmware of the node
ipmitool –H
<node BMC ip address>
hpm upgrade <HPM file> all activate
The IPMI command to update the BIOS firmware
upgrades both CPUs.
Computer command prompt
API
www.kontron.com
MSP8020 Series User Guide Rev. 1.1
-U admin –P admin
// 24
Advertisement
Table of Contents
