Network Interfacing; Figure 5: Cpu Connections - Kontron MSP8020 Series User Manual

1.7. Network Interfacing

The F1 (fabric 1) port of CPU 1 connects to hub 1, the B2 (base 2) port of CPU 1 connects to hub 2, the F2 port of CPU 2
connects to hub 2, and the B1 port of CPU 2 connects to hub 1 (Figure 5). The KVM functionality of each CPU is on each
one's respective fabric port. Therefore, if the connection to a hub is lost, the KVM functionality of a CPU will be lost.
Each CPU supports two 1GbE links for the application level.
For a complete port mapping and network topology of the system, refer to the
User's Guide.

Figure 5: CPU connections

For more information, refer to the MSP802x block diagram (Figure 3).
www.kontron.com
MSP8020 Series User Guide Rev. 1.1
MSH89xx
// 15