Table of Contents
Advertisement
76
13.3.16 Setting the System Date and Time
The current date and time can be entered from the Date and Time screen or from an SNMP manager
The date is entered in the mm/dd/yyyy format and the time is entered in the hh:mm:ss format.
!
Hot Tip!
The date and time can also be set from an SNMP manager.
Use the following steps to manually set the system's time and date:
1. From the
menu, select
, see Figure 2.31.
Edit
Date and Time
2. Enter the appropriate date, the day of the week, and time.
3. Click
to save the data and time settings.
Submit Data
The date and time will need resetting following a power failure or reboot unless your NetGuardian is
equipped with the real-time clock option or network time is enabled.
Advertisement
Table of Contents
Need help?
Do you have a question about the NetGuardian 420 and is the answer not in the manual?
Questions and answers