DPS Telecom NetGuardian 420 Hardware User Manual page 60

54
conditions or other instructions. The hyperlinked page or file will be displayed in the main window frame of the
NetGuardian Web browser. Follow the directions below to create hyperlinks for alarm point descriptions.
1. From the Menu select
Edit
2. Enter your base URL (e.g.
point descriptions based on the URL. Once the base URL is entered, the NetGuardian automatically attaches
a unique suffix to each alarm point. For example, if the base URL is
the base alarm at point 1 would be
www.dpstele.com/base2.html
3. To add a suffix other than html to the hyperlinks, insert the text
user to specify the extension. For example, if the base URL is
for the base alarm at point 1 would be
!
Hot Tip!
Any file type that is viewable in your Web browser (e.g. word document, PDF, txt, etc.) is a
linkable file.
4. The same link structure applies to the Ping Alarms, System Alarms, and Analog Alarms fields. See Table 2.D
for specific URL extension link information.
System Alarms
Analog Alarms
* Using the code in the base URL enables you to link to any file type viewable in your Web browser.
&pntID;
. Scroll down to the
Ports
http://www.dpstelecom.com
http://www.dpstele.com/base1.html
, and so on.
http://www.dpstele.com/base1.pdf/
Alarm Page
Base Alarms
Ping Alarms
Table 2.D. Specific link extensions
field, see Figure 2.5.
Base URL
). The NetGuardian creates the links from the alarm
http://www.dpstelecom.com
&pntID;
http://www.dpstele.com/&pntID;.pdf
Base URL web page link*
Base1.html - Base20.html
Ping1.html - Ping32.html
System1.html - System64.html
Analog1.html - Analog8.html
, Base Alarm Point 2 would be
into the base URL. This allows the
.
the link for
http://
, the link