DPS Telecom NetGuardian 420 Hardware User Manual page 53

47
SNMP Menu
Globals
This field defines how the NetGuardian unit may be accessed via SNMP. This can be
Read and Write
Access set to the following:
· All- Allows you to read or write using any version of SNMP (v1, v2c, v3)
· Disabled- Restricts all access to unit via SNMP
· v1-Only- Allows SNMPv1 access only
· v2c-Only- Allows SNMPv2c access only
· v3-Only- Allows SNMPv3 access only
Specifies the v3 Engine ID for your NetGuardian device. DPS recommends using the
v3 Engine ID
default ID for the unit, which is automatically generated by the unit. The default ID is
generated according to RFC3411 and is based on the unit's unique MAC address and
DPS Telecom's SNMP enterprise number.
Note: To have the unit generate a unique Engine ID, clear the v3 Engine ID field and
press the Submit key.
SNMP Communities
Community name for SNMP requests.
Get
Community name for SNMP SET requests.
Set
Community name for SNMP TRAP requests. In SNMP v3, defines the context name
Trap / v3
Context Name field of a v3-Trap.
Note: Make sure that your community strings match those used by the SNMP
manager. In v1 and v2c, community strings are security passwords; if the strings do not
match, the SNMP manager will not accept Traps from the NetGuardian. Community
strings are case sensitive.
v3-Users
The user number designated for a v3-user. The NetGuardian supports up to four
ID