Connecting To The Netguardian; Via Craft Port - DPS Telecom NetGuardian 420 Hardware User Manual

24
11

Connecting to the NetGuardian

11.1

... via Craft Port

NetGuardian Craft Port
The simplest way to connect to the NetGuardian is over a physical cable connection between your PC's COM port
and the NetGuardian's craft port.
Use the DB9M-DB9F download cable provided with your NetGuardian to make a craft port connection.
Select the following COM port options:
• Bits per second: 9600
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: None
The default password is 'dpstelecom'
You can perform basic configuration via the craft port — but if you like, you can connect via the craft port just to
configure the NetGuardian's Private LAN IP address, and then do the rest of your configuration via a LAN
connection.