General Specifications And Environmental Conditions; Dimensions; Vlt® Onegeardrive® Standard; Vlt® Onegeardrive® Standard With Torque Arm In Front Position (Optional) - Danfoss VLT OneGearDrive Operating Manual

VLT® OneGearDrive®
Operating Guide

9.5 General Specifications and Environmental Conditions

Table 18: General Specifications and Environmental Conditions
Installation elevation
Maximum backlash of gearbox unit

9.6 Dimensions

9.6.1 VLT® OneGearDrive® Standard
74
[2.91]
115
[4.53]
Illustration 18: VLT® OneGearDrive® Standard
9.6.2 VLT® OneGearDrive® Standard with Torque Arm in Front Position (Optional)
185
[7.28]
Illustration 19: VLT® OneGearDrive® Standard with Torque Arm in Front Position (Optional)
32 | Danfoss A/S © 2020.12
There is no derating of the VLT® OneGearDrive® itself. Refer to the Design Guide for the in-
stalled drive.
±0.07°
287
[11.30]
147
78.5
[5.79] [3.09]
M10x20 deep
287
[11.30]
74 78.5
147
[5.79]
[2.91] [3.09]
122
[4.80]
184
[7.24]
122
[4.80]
Specifications
185
[7.28]
183
[7.20]
90
[3.54]
3.5
[0.14]
92.5
[3.64]
35
[1.38]
6
[0.24]
1
[0.39]
123
[4.84]
AQ347551551757en-000101 / 130R0239