To Activate Certain Network Services When Using Call Reply; Call Reply To Ddi Number Via Caller Id; Clearing The Caller Id Stored In Memory - Brother Fax-1020Plus Owner's Manual

RECEIVING FAXES AND OTHER CALLS
FOR YOUR INFORMATION

To Activate Certain Network Services When Using Call Reply

It may be desired (in order to activate certain network services), to insert a special prefix to
be dialled in front of the Caller ID number when using the Call Reply feature. Some examples
of such network services are :
* Your outgoing Caller ID withheld
The required prefix, typically three to six digits (including # and * symbols) in length, may
be inserted after displaying the desired Caller ID in step 6 on the previous page. (You can
enter the prefix up to 20 digits on the machine. ) The complete number string including the
prefix will then be dialled by pressing Start.
Select the desired Caller ID, wait 2
Previous
( )
page Step 6. seconds until you see the date and
time the caller ID was received.
Enter the prefix by using number
keys up to 20 digits. (Example:
123)
- The display will be cleared when
you press any of the number keys .
- To cancel the prefix (such as when
you entered the wrong number),
simply press Stop.
The display will return to the
desired Caller ID you selected.
- If you press Stop again, the
machine will return to the current
date and time display. You just
escaped from the Call Reply mode.
- Any problems or queries in using network services should be raised in the first instance
with your network operator(s).
- With Call Reply, automatic redial does not function in cases where the called party is
busy or doesn't answer.
Call Reply to DDI numbers via Caller ID
Calls derived from a caller ID number to destinations connected to a "Direct Dial Inward
(DDI)" private exchange system may fail to connect, or may be answered in the first instance
by the called premises' main switchboard rather than by the intended extension. Brother is
not liable for any call charges thus incurred.

Clearing the Caller ID Stored in Memory

For the effective use of the memory, it is recommended that you should clear the Caller ID
stored into memory by pressing Clear when the display shows the number.
7-21
25)09/11 15:25
PRESS START KEY
123
25)5555151