Sequence Of External Tad Reception (Tad Mode) - Brother Fax-1020Plus Owner's Manual

FOR YOUR INFORMATION

Sequence of External TAD Reception (TAD mode)

Fax reception is
automatically
Auto dial
activated by
fax call
fax tone.
The fax message
is received on
paper.
Telephone Answering Device
1. Set the telephone answering device so that it is ready to record incoming
telephone calls.
2. Set the number of rings to one or two on your telephone answering device.
3. Try to record the shortest possible message on your telephone answering
device (less than 10 seconds). We recommend 4 seconds of silence at the
start of the message.
Please note that some faxes that are sent manually cannot be received automatically because
some fax machines do not send a fax tone in manual mode.
In these cases you must inform callers that they must enter the remote activation code to
send a fax.
RECEIVING FAXES AND OTHER CALLS - CHAPTER 7
Incoming Call
The call is picked up
by the TAD.
(Recommended short
TAD ring delay such
as 1 or 2 rings.)
The external TAD
outgoing message
begins. (Recommended
length of 10 seconds
or less.)
Voice call
The caller leaves a
voice message on the
external TAD.
The caller must
press Start or
Manual
enter your remote
fax call
activation code
to activate the
fax machine.
The fax message is
received on paper.
The caller can also
send a fax message
after the voice message.
7-16