If You Get A Memory Full Message When Trying To Send A Fax By Using Memory; Delayed Transmission - Brother Fax-1020Plus Owner's Manual

FOR YOUR INFORMATION
If You Get a MEMORY FULL Message When Trying to Send a Fax by Using
Memory
In the unlikely event of the memory becomes full when scanning page one, the display
shows "PRESS STOP KEY", then press Stop to abort the job.
If the memory becomes full on page 2 or more of a multi-page document, you will be prompted
to press Start to send the portion already scanned, or Stop to abort the job.

Delayed Transmission

You can set the timer to send documents at a later time (up to 24 hours later). Your fax
machine will also produce a report, the "Delayed Sending Report", after the fax is sent. You
can set up to three different documents for delayed transmission.
KEYS TO PRESS
1. Insert the documents into the feeder.
2. Press Memory if you use memory
transmission.
3. Press Menu.
4. Press 1.
5. Press 1.
6. Enter the time in 24-hour format
using the number keys.
Example: 19:45 (7:45 P.M.).
7. Wait for two seconds.
8. Press Stop.
SENDING FAXES - CHAPTER 6
THE DISPLAY WILL SHOW:
09/12 15:25
FAX: NO. & START
COPY: PRESS COPY
MEMORY
ENTER FAX NO.
1.TEMP.SETTINGS
1.TEMP.SETTINGS
1.TIMER
SET TIME=00:00
SET TIME=19:45
1.TIMER
ENTER FAX NO.
MEMORY
FAX
100%
100%
6-8