C Lcd And User Setting Area (Fax 1030 Plus) - Brother Fax-1020Plus Owner's Manual

THE CONTROL PANEL KEYS
c LCD AND USER SETTING AREA
FAX 1030 PLUS
15. Z (Left Arrow)
This key moves the LCD cursor to
the left. It also allows you to back
up one step when you are in function
mode (see chap. 3) or Tel-Index.
(See chap. 5.)
17. Set
This key is used for storing a
function setting into the fax machine.
(See chap. 3.)
19. Clear
This key deletes entered data or
backs up one step in a function
procedure. (See chap. 3.)
21. X (Right Arrow) *
This key moves the LCD cursor
to the right, and it also lets you
advance one step when you are
in function mode (see chap. 3)
or Tel-Index. (See chap. 5.)
2-7
FAX - 1O3O
P L A I N P A P E R F A X
Set Menu Clear
16. Liquid Crystal Display
The LCD displays messages that will
help you set up and operate your fax
machine. (On-Screen Programming)
(See chap. 3.)
18. Menu
This key accesses the function and on
screen programming mode (OSP), so
you can alter various settings. (See
chap. 3.)
c
Fine
Photo
S.Fine
Resolution
20. Resolution
This key is used to set the resolution
requirements when sending a fax. (See
chap. 6.) Also, you can decrease the
speaker volume during a call using
Speaker Phone or while playing a
message by pressing this key.
22. Mode
This key is used to specify how the fax
machine should handle incoming calls.
(Answer Mode) (See chap. 7.) Also, you
can increase the speaker volume during
a call using Speaker Phone or while
playing a message by pressing this key.
FAX
TAD
F/T
Mode Spee