The Auto Document Feeder (Adf); Getting Ready To Send A Fax; Setting The Resolution - Brother Fax-1020Plus Owner's Manual

Brother owner's manual fax machine fax-1020plus, fax-1030plus
Table of Contents

Advertisement

The Auto Document Feeder (ADF)

The Auto Document Feeder (ADF) automatically feeds documents (up to 20 pages) into
the fax machine, one at a time. The thickness and weight of the documents should fall into
the following categories:
Thickness: For one sheet: 0.07 to 0.12 mm (2.8 x 10
For multiple sheets: 0.07 to 0.10 mm (2.8 x 10
Weight:
For one sheet: 52 to 85 g/m
For multiple sheets: 52 to 80 g/m
Before inserting documents into the document feeder, fan the sheets of paper to make sure
the documents are not stuck together. Then tap the leading edge on a table so that all the
pages are even when placed in the feeder. Make sure you always put the documents in face
down.

Getting Ready to Send a Fax

SETTING THE RESOLUTION

You can choose a setting (STANDARD, FINE, SUPERFINE, or PHOTO) for the resolution
any time before you press Start or Copy. You can choose a setting by pressing the Resolution
key. The current status of the setting will be displayed on the LCD or Resolution lights
when you press the Resolution key.
You can easily check the current setting of resolution by looking at the resolution lights:
means light off .
Resolution lights are available only on FAX 1030 Plus.
STANDARD
FINE
SUPERFINE
PHOTO
2
means light on.
Fine
Photo
The STANDARD resolution can be used for most typewritten text.
S.Fine
Transmission speed is normal.
When the STANDARD setting is on, both lights are off.
Fine
Photo
The FINE resolution is an ideal setting to use if you want to send
S.Fine
documents that have small print. Transmission speed is slower
than STANDARD.
When the FINE setting is on, the FINE light will be lit.
Fine
Photo
The SUPERFINE resolution is a good setting to use for documents
S.Fine
with very small print or artwork. Transmission speed is slower
than FINE.
When the SUPERFINE setting is on, the S. FINE light will be lit.
Fine
Photo
The PHOTO resolution is ideal for sending documents that have
S.Fine
varying shades of gray, such as photographs. Transmission speed
is slower than FINE.
The PHOTO setting is on when both lights are lit.
SENDING FAXES - CHAPTER 6
-3
to 4.7 x 10
-3
to 3.9 x 10
-3
(0.07 x 10
to 0.121 x 10
2
-3
(0.07 x 10
to 0.114 x 10
-3
inches).
-3
inches).
-3
2
lbs/inch
).
-3
2
lbs/inch
).
6-2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fax-1030plus1030e - fax b/w thermal transfer

Table of Contents