Brother Fax-1020Plus Owner's Manual page 37

HOW TO USE ON-SCREEN PROGRAMMING (OSP) AND HELP KEY - CHAPTER 3
Level one Level two
function function
3. COVERPG
ON/OFF
4. ERROR
RE-TX
5. USER
5. REDUCTION
OPTIONS
6. MEM.
RECEIVE
7. CLOCK
CHANGE
8. MEMORY
SECURITY
(Only for FAX 1020 Plus)
1. TONE/
PULSE
2. RING
DELAY
3. SPEAKER
VOLUME
6. TEL
4. ICM REC.
OPTIONS
MONITR
(Only for FAX 1030 Plus)
5. F/T RING
TIME
(4. on FAX 1020 Plus)
6. RING
VOLUME
(5. on FAX 1020 Plus)
Explanation of Options
If you set COVERPAGE to ON, you can send your
documents with a Cover Page generated by your
machine. When the COVERPAGE setting is ON,
you can select a Cover Page comment.
ON/OFF
If you set ERROR RE-TRANSMISSION to ON,
the machine automatically resends the page once
an error occurs.
ON/OFF
You can avoid having an incoming fax on separate
pages by printing a reduced copy of the incoming
document. The reduction methods are AUTO or
Fixed ratio:
AUTO/100%/93%/87%/75%
Your fax machine will automatically store any
incoming faxes in its memory if it runs out of paper.
ON/OFF
You can adjust the installed clock on a one hour
basis according to summer/winter time change.
SUMMER/WINTER
Prohibit most functions except receiving faxes into
memory.
There are two different types of dialling and you
must select the type of signal suitable for your
telephone exchange.
TONE/PULSE
This is the number of rings before the fax machine
answers the call when in F/T or FAX Answer
Mode. 1/2/3/4 rings
You can adjust the speaker volume with this function.
OFF/LOW/MEDIUM/HIGH
You can adjust the monitor volume of incoming
voice message being recorded into the Message
Manager Memory.
OFF/LOW/MEDIUM/HIGH
F/T RING TIME sets the time for simulated ringing
in F/T mode.
10/20/30/60 seconds (For U.K.)
10/20/30/45 (For Ireland)
The settings are OFF/LOW/MEDIUM/HIGH.
Factory
Chapter
setting
OFF 6
OFF 6
AUTO 7
ON 7
4
OFF 4
TONE 4
2 7
LOW
7
LOW 10
20 7
MED 7
3-4