Kessel Aqualift Mono Manual page 35

3.2 Profile memory
3.3 Date/Time
3.4 Type Aqualift
3.5 Sensor configuration
010-910
3.1.14 Alarm level
3.1.15 ON 2 - level
3.1.16 OFF 2 - level
3.2.1 Load parameters
3.2.2 Save parameters
3.4.1 Lifting station F Compact
3.4.2 Lifting station F
3.4.3 Lifting station F XL 200 l
3.4.4 Lifting station F XL 300 l
3.4.5 Lifting station S 28541
3.4.6 Lifting station S 28550 (Mono),
lifting station S 28530 (Duo)
3.4.7 Pump station S XL KTP500/
GTF600
3.4.8 Pump station S KTP 500/
GTF600
3.4.9 Pump station S XL GTF 1200
3.4.10 Pump station S GTF 1200
3.4.11 Pump station F STZ 1000 (with-
out ATEX)
3.4.12 Pump station F XL dry set-up
3.4.13 Pump station F XL GTF 1400
without ATEX
3.4.14 Pump station F without ATEX
(Ama-Porter)
3.4.15 Lifting station, S Compact
GTF500
3.4.16 Lifting station, S Compact
GTF1200
3.4.17 Lifting station S 100l
3.4.18 Lifting station S 200l
3.4.19 Special lifting station
3.4.20 Special pump station
3.5.1 Pressure sensor+optical probe
3.5.2 Pressure sensor+Conductivity
probe
3.5.3 Pressure sensor+Float switch
alarm
3.5.4 Pressure sensor+Air compres-
sor
3.5.5 Pressure sensor+air compres-
sor + alarm float
3.5.6 Pressure sensor+air compres-
sor+ optical probe
3.5.7 Floater
3.5.8 Float switch without off level
3.5.9 Level sensor
3.5.10 Level sensor + Alarm switch
3.5.11 Conductivity probe
3.5.12 Pressure sensor
mm 0 - 5000
mm 0 - 5000
mm 0 - 5000
35 / 56