How to change between wheel
sets
With 4.2-inch display
1
Park the vehicle in a safe place
and fit the vehicle with your pre-
ferred wheel set.
2
Press
or
of the meter
control switches on the steering
wheel and select
3
Press
or
of the meter
control switches and select
"Vehicle Settings", and then
press and hold
4
Press
or
of the meter
control switches and select
"TPWS", and then press
5
Press
or
of the meter
control switches and select
"Identifying Each Wheel & Posi-
tion". Then press and hold
until the tire pressure warning
light starts slowly blinking 3
times.
Afterward, the tire pressure warning
light turns on after flashing for 1 minute.
After 2 minutes, changing the ID codes
7-3. Do-it-yourself maintenance
of a second wheel set is being per-
formed. The tire pressure warning light
will turn off.
6
Initialize the tire pressure warn-
ing system. (P.667)
If the tire inflation pressure settings for
the installed tires change, initialization
operations are required, but if the tire
inflation pressure settings are the
same, initialization is not required.
7
Drive straight (with occasional
.
left and right turns) at approxi-
mately 40 km/h (25 mph) or
more for approximately 10 to 30
minutes.
.
Changing a second wheel set is com-
plete when the tire pressure warning
light turns off and the inflation pressure
of each tire is displayed on the multi-
information display.
With 7-inch display
.
1
Park the vehicle in a safe place
and fit the vehicle with your pre-
ferred wheel set.
2
Press
control switches on the steering
wheel and select
3
Press
control switches and select
4
Press
control switches and select
"TPWS", and then press
5
Press
control switches and select
or
of the meter
.
or
of the meter
, and then press and hold
.
or
of the meter
or
of the meter
673
7
.