Toyota Land Cruiser Station Wagon Owner's Manual page 142

*
: These items are reset each time the
engine stops.
 "Total"
• "Average Speed": Displays the aver-
age vehicle speed since the display
*
was reset
• "Distance Travelled": Displays the
distance driven since the display was
*
reset
• "Total Time": Displays the elapsed
time since the display was reset
*
: To reset, display the desired item and
press and hold .
Tire inflation pressure (if
equipped)
Displays inflation pressure of each
tire.
Front tire direction display
Displays the operation amount and
direction of the steering wheel via
changes to the front tires on the
display.
Settings display
Vehicle settings and the content
displayed on the screen can be
changed by using the meter control
switches.
Setting procedure
1
Operate or
control switches and select
2
Operate or
control switches and select the
desired item.
• If the function is turned on and
off or the volume, etc. is changed
on the setting screen, the setting
is changed each time
pressed.
• For functions that allow opera-
tion contents, display contents,
etc., of function to be selected,
the setting screen is displayed by
pressing and holding
*
the setting screen is displayed,
select the setting or desired
value (time, etc.) with
3
After changing the settings,
press
switches.
Instrument cluster brightness
Select to adjust the brightness of
the Instrument cluster lights.
"Clock: 00" (if equipped)
(P.131)
Select to set up the clock setting.
with Yaw Assist Function) (if
equipped) (P.324)
Select to set up the following items.
 "Alert"
Select to change the alert types.
 "Sensitivity"
of the meter
Select to set the warning sensitivity.
.
 "Sway Warning"
of the meter
Select to enable/disable the vehicle
sway warning.
 "Sway Sensitivity"
Select to set the vehicle sway warning
2-1. Instrument cluster
of the meter control
LDA (Lane Departure Alert
141
is
. When
2
.