Table of Contents
Advertisement
the Turn Assist function is operat-
ing. When the switch is pressed,
the Turn Assist indicator will go off,
and a message stating that the
Turn Assist function has been
turned off will be displayed on the
multi-information display for several
seconds.
Operation conditions of the Turn
Assist function
The vehicle speed is approximately 10
km/h (6 mph) or less.
Crawl Control is operating.
The front and rear differentials (if
equipped) are not locked.
The brake pedal is not depressed
The shift lever is in any gear other
than P, R or N.
The steering wheel is turned very far.
Automatic system cancelation of
the Turn Assist function
When the front or rear differentials (if
equipped) are locked, a buzzer will
sound intermittently and the Turn Assist
function will be canceled automatically.
In this event, the Turn Assist indicator
will go off, and a message stating that
the Turn Assist function has been turned
off will be displayed on the multi-infor-
mation display for several seconds.
Function limitations of the Turn
Assist function
In the following situations, the Turn
Assist function will stop temporarily. In
this event, the Turn Assist indicator will
flash.
When the vehicle speed exceeds
approximately 10km/h (6 mph).
When the shift lever is moved to R.
When the battery is disconnected
The Turn Assist indicator will flash and
the system needs to be initialized. Drive
the vehicle straight ahead for a while at
4-5. Using the driving support systems
a speed of approximately 35 km/h (22
mph) or more. If the Turn Assist indica-
tor still flashes even after initializing the
system, have the vehicle inspected by
your Toyota dealer.
485
4
Advertisement
Table of Contents
