Toyota Land Cruiser Station Wagon Owner's Manual page 131

130
2-1. Instrument cluster
Odometer:
Displays the total distance that the vehicle has been driven
Trip meter:
Displays the distance the vehicle has been driven since the meter was last reset.
Trip meters "A" and "B" can be used to record and display different distances inde-
pendently.
Oil maintenance (except for 1GR-FE engine):
Displays the distance until the next engine oil change.
J
Shift position and shift range/gear position
Displays the selected shift position or selected shift range/gear position (P.261,
264)
K
Engine coolant temperature gauge
Displays the engine coolant temperature
The meters and display illuminate
when
The engine switch is in ON.
Outside temperature display
In the following situations, the correct
outside temperature may not be dis-
played, or the display may take longer
than normal to change.
• When stopped, or driving at low
speeds (less than 20 km/h [12 mph])
• When the outside temperature has
changed suddenly (at the
entrance/exit of a garage, tunnel, etc.)
When "--" or "E" is displayed, the sys-
tem may be malfunctioning.
Take your vehicle to your Toyota
dealer.
Displays the outside temperature
within the range of -40°C (-40°F) to
60°C (140°F).
When the outside temperature is
approximately 3°C (37°F) or lower,
the indicator will flash for approxi-
mately 10 seconds, then stay on.
Liquid crystal display
P.137
WARNING
The information display at low
temperatures
Allow the interior of the vehicle to
warm up before using the liquid crys-
tal information display. At extremely
low temperatures, the display moni-
tor may respond slowly, and display
changes may be delayed.
For example, there is a lag between
the driver's shifting and the new gear
number appearing on the display.
This lag could cause the driver to
downshift again, causing rapid and
excessive engine braking and possi-
bly an accident resulting in death or
injury.
NOTICE
To prevent damage to the engine
and its components
Do not let the indicator needle of
the tachometer enter the red zone,
which indicates the maximum
engine speed.