Toyota Land Cruiser Station Wagon Owner's Manual page 284

Turning the high beams
on/off manually
Switching to the high beams
Push the lever away from you.
The Adaptive High-beam System indi-
cator will turn off and the headlight high
beam indicator will turn on.
Pull the lever to its original position to
activate the Adaptive High-beam Sys-
tem again.
Switching to the low beams
Press the Adaptive High-beam Sys-
tem switch.
The Adaptive High-beam System indi-
cator will turn off.
Press the switch to activate the Adap-
tive High-beam System again.
Temporarily switching to the
low beams
Pull the lever toward you and then
4-3. Operating the lights and wipers
return it to its original position.
The high beams are on while the lever
is pulled toward you, however, after the
lever is returned to its original position,
the low beams remain on for a certain
amount of time. Afterwards, the Adap-
tive High-beam System will be acti-
vated again.
Temporarily switching to the low
beams
It is recommended to switch to the low
beams when the high beam may cause
problems or distress to other drivers or
pedestrians nearby.
283
4