Table of Contents
Advertisement
extending of the mirrors to be linked to
locking/unlocking of the doors.
Using automatic mode in cold
weather (vehicles with automatic
mode)
When automatic mode is used in cold
weather, the door mirror could freeze up
and automatic stowing and return may
not be possible. In this event, remove
any ice and snow from the door mirror,
then either operate the mirror using
manual mode or move the mirror by
hand.
Customization (vehicles with auto-
matic mode)
The automatic mirror folding and
extending operation can be changed.
(Customizable features: P.768)
WARNING
When a mirror is moving
To avoid personal injury and mirror
malfunction, be careful not to get your
hand caught by the moving mirror.
Linked mirror function when
reversing (if equipped)
When the mirror select switch is in
the L or R position, the outside rear
view mirrors will automatically
angle downwards when the vehicle
is reversing in order to give a better
view of the ground.
To disable this function, move the
mirror select switch to the neutral
position (between L and R).
Adjusting the mirror angle
when the vehicle is reversing
With the shift lever in R, adjust the
mirror angle at a desired position.
3-4. Adjusting the steering wheel and mirrors
The adjusted angle will be memo-
rized and the mirror will automati-
cally tilt to the memorized angle
whenever the shift lever is shifted to
R from next time.
The memorized downward tilt position
of the mirror is linked to the normal
position (angle adjusted with the shift
lever in other than R). Therefore, if the
normal position is changed after adjust-
ment, the tilt position will also change.
When the normal position is changed,
readjust the angle in reversing.
213
3
Advertisement
Table of Contents
