Opening, Closing The Windows And Moon Roof; Power Windows - Toyota Land Cruiser Station Wagon Owner's Manual

214

3-5. Opening, closing the windows and moon roof

Power windows

3-5.Opening, closing the windows and moon roof

Opening and closing the

power windows

The power windows can be opened
and closed using the switches.
Operating the switch moves the
windows as follows:
1
Closing
2
One-touch closing
3
Opening
4
One-touch opening
*
: To stop the window partway, operate
the switch in the opposite direction.
The power windows can be oper-
ated when
The engine switch is in ON.
Operating the power windows after
turning the engine off
The power windows can be operated for
approximately 45 seconds even after
the engine switch is turned to ACC or
turned off. They cannot, however, be
operated once either front door is
opened.
Jam protection function
If an object becomes jammed between
the window and the window frame while
the window is closing, window move-
ment is stopped and the window is
opened slightly.
Catch protection function
If an object becomes caught between
the door and window while the window
is opening, window movement is
stopped.
When the window cannot be
opened or closed
When the jam protection function or
catch protection function operates
unusually and the door window cannot
be opened and closed, perform the fol-
lowing operations with the power win-
dow switch of that door.
Stop the vehicle. With the engine
switch in ON, within 4 seconds of the
jam protection function or catch pro-
tection function activating, continu-
ously operate the power window
switch in the one-touch closing direc-
tion or one-touch opening direction so
that the door window can be opened
and closed.
If the door window cannot be opened
*
and closed even when performing the
above operations, perform the follow-
ing procedure for function initializa-
tion.
*
1
Turn the engine switch to ON.
2
Pull and hold the power window
switch in the one-touch closing
direction and completely close the
side window.
3
Release the power window switch
for a moment, resume pulling the
switch in the one-touch closing
direction, and hold it there for
approximately 6 seconds or more.
4
Press and hold the power window
switch in the one-touch opening
direction. After the door window is
completely opened, continue holding
the switch for an additional 1 second
or more.
5
Release the power window switch
for a moment, resume pushing the
switch in the one-touch opening
direction, and hold it there for
approximately 4 seconds or more.