Table of Contents
Advertisement
274
4-2. Driving procedures
• When the brake hold switch is
pressed while the downhill assist con-
trol system is activated.
• When the brake hold switch is
pressed while the four-wheel drive
control switch is turned to L4 mode.
"Brake Hold Unavailable Press Brake
to Deactive"
• When the DAC/CRAWL switch is
operated while the brake hold system
is activated.
• When the four-wheel drive control
switch is turned to L4 mode while the
brake hold system is activated.
The brake hold system and downhill
assist control system or transfer L4
mode cannot be activated at the same
time.
Please press the brake hold switch with
the brake pedal depressed to turn off the
brake hold system.
If the brake hold operated indicator
flashes
P.705
WARNING
When the vehicle is on a steep
incline
Take care when using the brake hold
system on a steep incline, exercise
caution. The brake hold function may
not hold brakes in such situations.
Also, the system may not activate
depending on the angle of the slope.
When stopped on a slippery road
The system cannot stop the vehicle
when the gripping ability of the tires
has been exceeded. Do not use the
system when stopped on a slippery
road.
NOTICE
When parking the vehicle
The brake hold system is not
designed for use when parking the
vehicle for a long period of time. Turn-
ing the engine switch off while the
system is holding the brake may
release the brake, which would cause
the vehicle to move. When operating
the engine switch, depress the brake
pedal, shift the shift lever to P and set
the parking brake.
Advertisement
Table of Contents
