Table of Contents
Advertisement
Configuring The COM Ports.
PCI Quad 422/485 Card
From the COM Ports window choose the port that you wish to configure and
click on Settings -
the following dialogue will be displayed:
Note: A port that has been added has the default values of:
Baud Rate:
9600
Data Bits:
8
Parity:
None
top Bits:
1.0
Flow:
None
Change the communications Settings in the COM Ports to match the baud rate,
parity settings etc. of the remote serial device.
Chapter 5 Windows 3.x Software Configuration. x 20
Advertisement
Table of Contents
